Building and Construction Study

美国建筑类Assignment代写范文:“Building and Construction Study”，这篇论文主要描述的是住宅类建筑的施工会是一个比较复杂的过程，本文主要讲述的就是外墙施工的部分，在住宅外墙的施工方面我们需要注意各类建筑细节的规划，在开挖地基、白蚁处理、边缘加固设计方面都需要遵循相应的标准。

OVERVIEW

This assignment, which is an individual written report, is to be considered a major assessment piece as described in the unit outline. It is designed not only to test students’ understanding of various residential structural components but also their report writing skills, all in keeping with the University’s stated goals of providing a varied learning environment. This supports also a number of graduate attributes to be developed in students in line with our agreement with the Australian Institute of Building and the Australian Institute of Quantity Surveyors.

The assignment takes the form of a formal written investigative report. The format and recommended layout can be found here 

The word limit is 3000 excluding all attachments and appendices. Attachments and appendices are discouraged and are undesirable.

Diagrams and sketches to support the written work are not to be counted towards the word limit. The emphasis is on construction details where examples are given to prove or support their evidence. Students should make every effort to use construction examples. The use of sketches to illustrate answers is a critical and essential component of this assignment, and in this instance, photographs are not considered adequate, and sketches are required. Photographs may be used as additional information to corroborate a sketch of a relevant construction detail, but are not necessary.

References to the BCA and other text books are required so construction details are positively related back to the “acceptable construction” provisions of the building code.

Reports are to be typewritten single-sided in Times New Roman, 11 font, at least 1.5 line spacings with freehand sketches as applicable, in A4 format, portrait orientation. Allow a 3cm left and 4cm right margin. The Assignment specific cover sheet must be attached to the front of the assignment.

The assignment must be stapled in the top left hand corner, with no other binding method to be used. Plastic sleeves, ring binders and the like are not acceptable.

This assignment must be submitted by 5:30pm 2 April 2013 in HARDCOPY only to the lecturer in class.

INSTRUCTIONS FOR STUDENTS

For students’ benefit three topics are nominated. Choose only ONE topic to write the report on.

The topics are:

1. Footing and slab construction.

Investigate a dwelling under construction (level slab no step) and identify the footing and slab construction “acceptable practice” system the builder has elected to use. Document and detail the various construction details. This includes the critical examination of the various components of the system such as the excavation of footings, compaction, fill under slabs, termite treatment, design of reinforcement and the treatment of the edges (amongst other things) and report on whether or not Builder has closely followed the BCA or applicable standards.

It is likely that there are variances. Investigate those and examine the negative impact those may have on the performance of the footing and slab system. Make recommendations for improvements or alternative systems if appropriate to do so, and draw appropriate conclusions.

2. External wall construction (brick veneer)

Investigate a dwelling under construction using a brick veneer external wall construction system. Document and detail the various construction details. This includes the critical examination of the various components of the system such as the treatment of cills, lintels, window or door openings, expansion or control joints, flashings, finish against eaves, gables, etc and report on whether or not Builder has closely followed the BCA or applicable standards.

It is likely that there are variances. Investigate those and examine the negative impact those may have on the performance of the walling system. Make recommendations for improvements or alternative systems if appropriate to do so, and draw appropriate conclusions.

3. External wall construction (Greenboard, Exin or Hebel)

Investigate a dwelling under construction using an alternative cladding system. Document and detail the various construction details. This includes the critical examination of the various components of the system such as the treatment of cills, lintels, window or door openings, expansion or control joints, flashings, finish against eaves, gables, etc and report on whether or not Builder has closely followed the BCA or applicable standards.

It is likely that there are variances. Investigate those and examine the negative impact those may have on the performance of the walling system. Make recommendations for improvements or alternative systems if appropriate to do so, and draw appropriate conclusions.

51due留学教育原创版权郑重声明：原创留学生作业代写范文源自编辑创作，未经官方许可，网站谢绝转载。对于侵权行为，未经同意的情况下，51Due有权追究法律责任。

51due为留学生提供最好的processing代写服务，亲们可以进入主页了解和获取更多assignment代写范文 提供美国作业代写服务。